Research Articles | Challenge Journal of Structural Mechanics

Dynamic response property of cooling tower structures

Takashi Hara


DOI: https://doi.org/10.20528/cjsmec.2015.03.009
View Counter: Abstract | 1345 times | ‒ Full Article | 433 times |

Full Text:

PDF

Abstract


Reinforced concrete (R/C) cooling tower structures have been used for cooling down the hot water produced by power or chemical plants. These structures are designed to prevent against the failure under a self-weight and a wind loading, as well as an earthquake loading. In this paper, the numerical scheme under parallel processing is introduced and the dynamic evaluation of the cooling tower under an earthquake loading is examined. In numerical analyses, the cooling tower is assumed to have two types of conventional column system, i.e., V-column and I-column systems. Both R/C shell portion and column system are modeled by use of solid elements. From the numerical analyses, the higher stress concentrations are arisen between the junctions of R/C shell and columns for I-column than those for V-column. Also, it is concluded that the additional reinforcements should be placed around the junction considering the seismic effects.


Keywords


cooling tower; R/C shell; column support; finite element method; parallel processing; dynamic response

References


Adeli H, Soegiarso R (1999). High-Performance Computing in Structural Engineering. CRC Press.

Hara T (2004a). Dynamic response analysis of R/C cooling tower shell. Proceedings of the WCCM VI in Conjunction with APCOM'04, Sep. 5-10, Beijing, China.

Hara T (2004b). Dynamic analysis of R/C cooling tower shells under earthquake loading. 5th International Symposium on Natural-Draught Cooling Towers, 283-291.

http://dx.doi.org/10.1201/b17001-43

Hara T (2006). Dynamic response of R/C cooling tower shell considering supporting systems. The International Symposium on Management Systems for Disaster Prevention ISMD.

Hara T, Gould PL (2002). Local-global analysis of cooling tower with cutouts. Computers and Structures, 80, 2157-2166.

http://dx.doi.org/10.1016/S0045-7949(02)00250-X

Hinton E (1988). Numerical Methods and Software for Dynamic Analysis of Plates and Shells. Pineridge Press, Swansea, U.K.

Hughes TJR, Levit I, Winget J (1983). An element-by-element solution algorithm for problems of structural and solid mechanics. Computer Methods in Applied Mechanics and Engineering, 36, 241-254.

http://dx.doi.org/10.1016/0045-7825(83)90115-9

Lang C, Meiswinkel R, Wittek U (2003). Anwendung von Schalenringelementen zur nichtlinearren dynamischen Berechnung von Stahlbeton- Rotationsschalen. Beton- und Stahlbetonbau, 98, 123-134.

http://dx.doi.org/10.1002/best.200300790


Refbacks

  • There are currently no refbacks.