Cover & Contents Vol.16 No.1

Full Text:

Related Articles

• Concrete strength monitoring and damage detection using piezoelectric-based wireless sensor
  Raju Narwade, Ruhita Jadhav
  Challenge Journal of Concrete Research Letters (2025) 16(1) 40-50
  Concrete stands as the predominant and extensively employed structural material in civil engineering. Timely evaluation of concrete strength is essential for maintaining structural safety and minimizing construction delays, thereby avoiding possible structural...
• Mechanical and durability study of nano-SiO2 and nano-TiO2 on fiber reinforced concrete
  Awadhesh Srivastava, Abhishek Mishra, Sachin Kumar Singh
  Challenge Journal of Concrete Research Letters (2025) 16(1) 33-39
  This work presents the results of an experimental investigation into the strength and durability properties of fiber-reinforced concretes that have polypropylene (PP) fibers added to the concrete by volume and nano-SiO2 (silicon dioxide) and nano-TiO2 (titaniu...
• Experimental study on the mechanical performance of polypropylene fiber-reinforced concrete incorporating palm oil fuel ash as partial cement replacement
  Alaa Omar Tanash, Ahmed Mokhtar Albshir Budiea, Mohd Faizal Md Jaafar, Khairunisa Muthusamy, Fahrizal Zulkarnain
  Challenge Journal of Concrete Research Letters (2025) 16(3) 115-124
  Environmental pollution caused by the disposal of palm oil fuel ash, a type of waste from the palm oil trade, needs to be resolved. At the same time, activities involved in the manufacturing of cement, which is the primary binder in commonly used concrete, hav...
• Design of reactive powder concrete mortar mixes through high strength and durability
  Yousry B. I. Shaheen, Zeinab A. Etman, Hanan Lotfy Sabiha
  Challenge Journal of Concrete Research Letters (2025) 16(3) 142-154
  This research investigates the characteristics of reactive powder concrete (RPC) through comprehensive analysis. The primary methodology involved evaluating both fresh (uncured) and hardened RPC specimens. The initial phase incorporated silica fume (SF) as a c...
• Nonlinear in-plane response of 3D-printed concrete walls with varied infill patterns: Experimental mix design and numerical structural assessment
  İsmail Hakkı Tarhan, Yeşim Tarhan
  Challenge Journal of Structural Mechanics (2025) 11(3) 160-173
  This study investigates the nonlinear in-plane structural behavior of 3D-printed concrete wall elements with two representative internal infill patterns ‒ lattice (L) and triangular (T) ‒ using finite element modeling informed by experimentally derived materia...