Cover & Contents Vol.16 No.4

Full Text:

Related Articles

• Evolutionary process and mechanical properties of polymers: A comprehensive review
  Shahnizan Imran Mohd Nazri, Nur Farhayu Ariffin, Mohamad Firdaus Mohamad Borhan
  Challenge Journal of Concrete Research Letters (2025) 16(4) 225-242
  The growing demand for innovative construction materials has driven the exploration of polymer-based composites due to their enhanced mechanical performance and potential environmental benefits. However, a clear understanding of the historical development, cla...
• Predicting compressive strength of heavyweight concrete using deep neural networks and Box–Behnken design
  Amir Hossein Derakhshan Nezhad, Seayf Allah Hemati, Omid Rezaifar
  Challenge Journal of Concrete Research Letters (2025) 16(4) 173-202
  This study investigates the prediction and evaluation of compressive strength in heavyweight concrete incorporating magnetite and steel slag, using two advanced modeling techniques: Deep Artificial Neural Networks (DANN) and Box-Behnken Response Surface Method...
• Experimental study on the mechanical performance of polypropylene fiber-reinforced concrete incorporating palm oil fuel ash as partial cement replacement
  Alaa Omar Tanash, Ahmed Mokhtar Albshir Budiea, Mohd Faizal Md Jaafar, Khairunisa Muthusamy, Fahrizal Zulkarnain
  Challenge Journal of Concrete Research Letters (2025) 16(3) 115-124
  Environmental pollution caused by the disposal of palm oil fuel ash, a type of waste from the palm oil trade, needs to be resolved. At the same time, activities involved in the manufacturing of cement, which is the primary binder in commonly used concrete, hav...
• Design of reactive powder concrete mortar mixes through high strength and durability
  Yousry B. I. Shaheen, Zeinab A. Etman, Hanan Lotfy Sabiha
  Challenge Journal of Concrete Research Letters (2025) 16(3) 142-154
  This research investigates the characteristics of reactive powder concrete (RPC) through comprehensive analysis. The primary methodology involved evaluating both fresh (uncured) and hardened RPC specimens. The initial phase incorporated silica fume (SF) as a c...
• Nonlinear in-plane response of 3D-printed concrete walls with varied infill patterns: Experimental mix design and numerical structural assessment
  İsmail Hakkı Tarhan, Yeşim Tarhan
  Challenge Journal of Structural Mechanics (2025) 11(3) 160-173
  This study investigates the nonlinear in-plane structural behavior of 3D-printed concrete wall elements with two representative internal infill patterns ‒ lattice (L) and triangular (T) ‒ using finite element modeling informed by experimentally derived materia...