Email this article The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader).
If you would like more information about how to print, save, and work with PDFs, Highwire Press provides a helpful Frequently Asked Questions about PDFs.
Alternatively, you can download the PDF file directly to your computer, from where it can be opened using a PDF reader. To download the PDF, click the Download link above.
Related Articles
-
İlknur Bekem Kara, Cuma KaraChallenge Journal of Concrete Research Letters (2025) 16(2) 51-59It is a well-known fact that the use of agricultural wastes in cementitious composites by turning them into ash provides both ecological and economic benefits. Tea factories in Türkiye are located in the Eastern Black Sea region. Tea waste generated in factori...
-
H. Alperen BulutChallenge Journal of Concrete Research Letters (2024) 15(3) 69-81This study was carried out to present a different approach to green concrete production by utilizing electronic waste (e-waste) and waste rubber powders in order to provide a solution to both the cost and carbon footprint problems arising from the rapid consum...
-
Fuad Abutaha, Asude İrem ÇelikChallenge Journal of Concrete Research Letters (2025) 16(2) 69-84Geopolymer, a promising alternative to traditional portland cement, offers a wide range of sustainable applications in the construction industry. Geopolymer mortar presents a sustainable future by mitigating carbon dioxide emissions associated with cement prod...
-
Serdal Ünal, Mehmet CanbazChallenge Journal of Concrete Research Letters (2025) 16(1) 15-24In general, surface contamination of building materials is caused by pollution, which can be divided into human-made and natural sources. Building materials whose surfaces are exposed to pollutants from these sources for a long time show chemical and physical ...
-
Tevfik Oğuzhan Ergüder, Caner BulutChallenge Journal of Structural Mechanics (2025) 11(4) 201-214This study examines the mechanical behavior of polylactic acid (PLA) components produced via Fused Deposition Modeling (FDM), focusing on the effects of infill geometry and build orientation on tensile strength and deformation. Three infill patterns‒Cubic Subd...
