Related Articles

• Examining the effects of different seismic base isolators on the seismic behavior of a real-size steel truss structure
  Serdar Çarbaş, Refik Burak Taymuş, Mehmet Özdemir
  Challenge Journal of Structural Mechanics (2025) 11(2) 106-115
  In this study, the seismic behavior of a real-size steel truss structure is examined for elastomeric isolator, double friction pendulum isolator, and fixed support conditions. Hence, the main aim of the study is to examine which type of support is safer for se...
• Seismic performance assessment of timber-framed (hımış) structures with different infill materials
  Muhammed Alperen Ozdemir
  Challenge Journal of Structural Mechanics (2025) 11(3) 149-159
  This study investigates the seismic performance of traditional timber-framed (hımış) structures incorporating different types of infill materials through advanced nonlinear finite element modeling. Timber-infilled walls represent a widely used hybrid construct...
• The mechanical properties of cement mortar reinforced with silica fume subjected to sulfate and chloride environment
  Sulaiman Al-Safi, Abdulghani Altharehi, Ibrahim A. Alameri, Abdulmalek Al-Jolahy
  Challenge Journal of Structural Mechanics (2025) 11(1) 55-69
  This study investigates the effect of incorporating micro-sized silica fume on the mechanical properties and durability of cement mortar when exposed to sulfate and chloride environments. Mortar samples were prepared by replacing cement with micro-sized silica...
• Mechanical characterization of FDM-printed PLA: Role of infill geometry and build direction
  Tevfik Oğuzhan Ergüder, Caner Bulut
  Challenge Journal of Structural Mechanics (2025) 11(4) 201-214
  This study examines the mechanical behavior of polylactic acid (PLA) components produced via Fused Deposition Modeling (FDM), focusing on the effects of infill geometry and build orientation on tensile strength and deformation. Three infill patterns‒Cubic Subd...
• A different approach for green concrete production: Determination of the effect of e-waste and waste rubber powder on durability properties of concrete
  H. Alperen Bulut
  Challenge Journal of Concrete Research Letters (2024) 15(3) 69-81
  This study was carried out to present a different approach to green concrete production by utilizing electronic waste (e-waste) and waste rubber powders in order to provide a solution to both the cost and carbon footprint problems arising from the rapid consum...