Research Articles | Challenge Journal of Concrete Research Letters

Production of durable high strength flowable mortar reinforced with hybrid fibers

Eethar Thanon Dawood, Mahyuddin Ramli
Eethar Thanon Dawood * Department of Building and Construction Engineering, Technical College of Mosul, Northern Technical University, Mosul, Iraq
Mahyuddin Ramli School of Housing, Building and Planning, Universiti Sains Malaysia, 11800 Gelugor, Penang, Malaysia
View Counter: Abstract | 2147 times | ‒ Full Article | 557 times |
Citation Metadata Academic search Print Email (Login required) Facebook X (Twitter) LinkedIn Reddit WhatsApp Contact author (Login required)

The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader).

If you would like more information about how to print, save, and work with PDFs, Highwire Press provides a helpful Frequently Asked Questions about PDFs.

Alternatively, you can download the PDF file directly to your computer, from where it can be opened using a PDF reader. To download the PDF, click the Download link above.

Related Articles

  • FRP-RC/PC members subjected to combined actions
    A. Ghani Razaqpur, Francesco Bencardino, Lidia Rizzuti, Giuseppe Spadea
    Challenge Journal of Structural Mechanics (2015) 1(1) 1-8
    The capacity provisions of conventional Reinforced Concrete (RC) and Prestressed Concrete (PC) beams subjected to combined action of torsion, shear and flexure are well known and stated by international/national codes. Similar provisions lack for concrete memb...
  • Dynamic response property of cooling tower structures
    Takashi Hara
    Challenge Journal of Structural Mechanics (2015) 1(1) 38-41
    Reinforced concrete (R/C) cooling tower structures have been used for cooling down the hot water produced by power or chemical plants. These structures are designed to prevent against the failure under a self-weight and a wind loading, as well as an earthquake...
  • Effectiveness of high performance mortar reinforced with fibers as a repair material
    Eethar Thanon Dawood, Tamara Waleed Ganim
    Challenge Journal of Concrete Research Letters (2017) 8(2) 29-47
    The present work deals with engineering properties of high performance mortar (HPM) to be used as a repair material. The experimental study was conducted on HPM reinforced with mono steel fibers and hybrid fibers consist of steel and polypropylene fibers. The ...
  • The effect of build direction on component strength in SLA-based additive manufacturing
    Hojjat Ghahramanzadeh Asl, Derya Karaman
    Challenge Journal of Structural Mechanics (2024) 10(3) 95-100
    Nowadays additive manufacturing is frequently used, especially in industrial applications such as aerospace and biomedical. In the additive manufacturing method, thanks to the layered manufacturing technique, it enables the production of components with all ki...
  • Improving bond performance of 3D-printable earth-based mortar reinforced with jute fibers
    Yeşim Tarhan, İsmail Hakkı Tarhan, Arnaud Perrot
    Challenge Journal of Structural Mechanics (2025) 11(2) 99-105
    3D printing technology has transformed the construction industry by enabling rapid and cost-effective production of complex geometries. However, it faces significant challenges, including sustainability concerns due to cement's environmental impact and reinfor...