Related Articles

• Impact of iron powder and blast furnace slag on the mechanical properties of polymer concrete: An experimental and hyperparameter-tuned ANN-based study
  Arif Ulu, Ali Ikbal Tutar, Mohsen Shams, Ferit Cakir
  Challenge Journal of Structural Mechanics (2024) 10(4) 149-158
  Polymer-based materials have become increasingly used in concrete production and various engineering applications due to their versatile properties. In particular, polymer concrete (PC) has become a preferred reinforcement material in the construction industry...
• A method for determination of the dimensions of seismic shear walls in buildings
  Turgut Öztürk, Zübeyde Öztürk, Onur Öztürk
  Challenge Journal of Structural Mechanics (2015) 1(2) 65-70
  A lateral load carrying system consisting of only shear walls is used generally for structures having 14 storeys or more. It can be seen that the effect of earthquakes in the systems consisting of the shear walls or shear walls-core are very small. For resisti...
• Effect of dosage on the mechanical properties of epscrete
  Mehmet Canbaz, Emir Günaltılı, Uğur Albayrak
  Challenge Journal of Structural Mechanics (2023) 9(3) 84-91
  Epscrete, which is made by employing aggregate made of expanded polystyrene beads, is often used to make wall panels, block components, and insulating plates. For these products to have greater mechanical qualities, 400, 600, and 800 dose epscrete specimens we...
• Effect of expanded polystyrene beads on the properties of foam concrete containing polypropylene fiber
  Mehmet Canbaz, Ali Can Türeyen
  Challenge Journal of Concrete Research Letters (2022) 13(1) 28-35
  In this study, foam concrete was produced using 3 different volumes of EPS beads (up to 100%), 3 different volumes of polypropylene(PP) fiber (up to 0.1)%, sand and 40% pre-produced foam which is fixed by volume. The water-cement ratio was 0.4 and the sand-cem...
• Mechanical properties of lightweight photocatalytic marbelite
  Serdal Ünal, Mehmet Canbaz
  Challenge Journal of Structural Mechanics (2024) 10(4) 159-165
  This study investigated the mechanical performance of lightweight photocatalytic marbelite (LPM). In the production of LPM, titanium dioxide (TiO2) and various fiber additives were used to impart self-cleaning properties to the LPM with photocatalytic effect. ...