Email this article The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader).
If you would like more information about how to print, save, and work with PDFs, Highwire Press provides a helpful Frequently Asked Questions about PDFs.
Alternatively, you can download the PDF file directly to your computer, from where it can be opened using a PDF reader. To download the PDF, click the Download link above.
Related Articles
-
Alaa Abdeltawab Aboalella, Abeer ElmalkyChallenge Journal of Concrete Research Letters (2023) 14(2) 39-46The growing concern over the significant ecological changes requires sustainable developments in all fields. Concrete production is one of the largest consumers of natural resources as it consumes a huge volume of natural fine and coarse aggregates, which cons...
-
İsmail İsa Atabey, Serhat Çelikten, Mehmet CanbazChallenge Journal of Concrete Research Letters (2023) 14(2) 31-38The sludge generated during forming processes of marble and andesite rocks is kept in dust form after drying. Due to the high consumption of andesite and marble, the storage and health problems of these dusts arise. Therefore, reducing the environmental impact...
-
Alaa Omar Tanash, Ahmed Mokhtar Albshir Budiea, Mohd Faizal Md Jaafar, Khairunisa Muthusamy, Fahrizal ZulkarnainChallenge Journal of Concrete Research Letters (2025) 16(3) 115-124Environmental pollution caused by the disposal of palm oil fuel ash, a type of waste from the palm oil trade, needs to be resolved. At the same time, activities involved in the manufacturing of cement, which is the primary binder in commonly used concrete, hav...
-
İlknur Bekem Kara, Cuma KaraChallenge Journal of Concrete Research Letters (2025) 16(2) 51-59It is a well-known fact that the use of agricultural wastes in cementitious composites by turning them into ash provides both ecological and economic benefits. Tea factories in Türkiye are located in the Eastern Black Sea region. Tea waste generated in factori...
-
İsmail Hakkı Tarhan, Yeşim TarhanChallenge Journal of Structural Mechanics (2025) 11(3) 160-173This study investigates the nonlinear in-plane structural behavior of 3D-printed concrete wall elements with two representative internal infill patterns ‒ lattice (L) and triangular (T) ‒ using finite element modeling informed by experimentally derived materia...
