Research Articles | Challenge Journal of Concrete Research Letters

Influence of Aggressive Chemical Environment on High Volume Fly Ash Concrete

Alok Verma, Mukesh Shukla, Anil Kumar Sahu

View Counter: Abstract | 972 times |, Full Article | 247 times |

Abstract


The benefits of using fly ash in cement concrete construction are well recognized in terms of cost reduction and management of environmental pollution. The advantages offered by the use of fly ash in concrete has impelled engineers to further extend the use of this waste product in the form of ‘High Volume Fly Ash Concrete’ (HVFAC). In the present paper; results of a study concerning the effect of acidic environment on the compressive strength of HVFAC have been reported. On the basis of results obtained; it has been concluded that HVFAC may be a promising material under such types of aggressive environmental conditions.

Keywords


fly ash; concrete; HVFAC; acidic environment; compressive strength

Full Text:

PDF

References


Shukla, M., Sahu, A.K. and Sachan, A.K., “Performance of Stone dust as fine aggregate replacing sand in concrete and mortar”, National Seminar on Advances in Special concretes, Indian Concrete Institute, Bangalore, 1998, pp. 241-248.

Regourd, M., “Resistance of Concrete to Chemical Attacks Sea Water Attack on Concrete and Precautionary Measures”, Material & Structures, Vol. 18, 1985, pp. 223-226

“Concrete in Sulphate-Bearing Soils and Ground Waters”, Building Research Establishment Digest 250, H.M. Stationary office, London, 1986.

Mehta, P.K., “Mechanism of Sulphate Attack on Portland cement concrete – another look”, Cement and Concrete Research, Vol. 13, No. 3, May 1983, pp. 401-406.

Wond, G. and Poole, T., “Effect of Pozzolans and Stags on the Sulfate Resistance of Hardraulic cement Mortars”, Concrete Durability - Katharine and Bryant Mather International Conference, A.C.I. SP-100, 1987

Lawrence, C.D., “Sulphate Attack on Concrete”, Magazine of Concrete Research, Vol. No. 153, 1990, pp.249-264.

Tikalsky, P.J. and Carras-quillo, R. L, “Influence of Fly Ash on the Sulfate Resistance of Concrete”, A.C.I. Materials Journal, Vol. 89, No.1, 1992, pp. 69-75.

Torii, M. and Kawamura, M., “Effects of Fly Ash on Silica Fume on the Resistance of Mortar to Sulfuric Acid and Sulfate Attack”, Cement and Concrete Research, Vol. 24, No. 2, 1994, pp. 361-370.

Wang, J.G., “Sulfate Attack on Hardened Cement Paste”, Cement and Concrete Research, Vol. 24, No. 4, 1994, pp. 735–742.

Al–Amoudi, O.S.B. et al, “Effects of Magnesium Sulfate and Sodium Sulfate on the Durability Performance of Plain and Blended Cements”, A.C.I. Materials Journal, Vol. 92, No.1, 1995, pp. 15-24.

Naik, T.R. et al, “Enhancement in Mechanical Properties of Concrete due to Blended Ash”, Cement and Concrete Research, Vol. 26, No. 1, 1996, pp. 49-54.

Mossazza, F., “Chemistry of Pozzolanic Addition and Mixed Cement”, Principal paper, 6th International Congress on the Chemistry of Cement, Moscow, 1974, pp. 3–38.

Cohen, M.D. and Bentur, A., “Durability of Portland Cement Silicon Fume Paste in Magnesium Sulfate and Sodium Sulfate Solutions”, A.C.I. Materials Journal, Vol. 85, No. 3, 1988, pp. 148–157.

Rasheeduzzafar et al, “Influence of Cement Composition on the Corrosion of Reinforcement and Sulfate Resistance of Concrete”, A.C.I. Materials Journal, Vol. 87, No. 2, 1990, pp. 114-122.

“Code of Practice for Plain and Reinforced Concrete”, IS:456-2000, Bureau of Indian Standards, New Delhi.

Miyagawa, T., “Durability Design and Repair of Concrete Structures: Chloride Corrosion of Reinforcing Steel and Alkali-Aggregate Reaction”, Magazine of Concrete Research, Vol. 43, No. 156, 1991, pp. 155-170.

Kumar, S. and Rao, C.V.S.K., “Sulfate Attack on Concrete in Simulated Cast–In Situ and Precast Situations”, Cement and Concrete Research, Vol. 25, No. 01, 1995, pp. 1-8.

Kumar, S., “Influence of Water Quality on the Strength of Plain and Blended Cement Concrete in Marine Environments”, Cement and Concrete Research, Vol.30 (2000), pp. 345-350

Al-Amoundi, O.S.B., “Mechanisms of Sulfate Attack in Plain and Blended Cements: A Review”, “Extending Performance of Concrete Structures”, Edited by Dhir, R.K. and Tittle, P.A.J., 1999, pp. 201-210.

Kumar, S. and Rao, C.V.S.K., “Effect of Sulfates on the Setting Time of Cement and Strength of concrete”, Cement and Concrete Research, Vol. 24, No. 7, 1994, pp. 1237–1244.

Kumar, S. and Rao, C.V.S.K., “Durability of Materials under Random Exposure Conditions”, Proceedings of International Seminar on “Civil Engineering Practices in the Twenty First Century”, Roorkee, 1996, pp. 751–756.

S. Kumar and C.V.S.K. Rao, “Strength Loss in Concrete due to varying Sulfate Exposure”, Cement and concrete Research Vol. 25, No. 1, 1995, pp. 57-62

Garvin, S.L., Ridal, J.P. and Halliwell, M., “Performance of Concrete in Contaminated Land”, “Extending Performance of Concrete Structures”, Edited by Dhir, R.K. and Tittle, P.A.J., 1999, pp. 201-210.

Aziz, M.A. and Koe, L.C.C., “Durability of Concrete Sewers in Aggressive Subsoils and Ground Water Conditions”, Geotechnical Aspects of Restoration Works, Edited by Balasubraman et al, Roterdam, 1990, pp 299-310.

Berke, N.S., Pfeifer, D.W. and Weil, T.G., “Protection Against Chloride Induced Corrosion”, Concrete International, Vol. 10, No. 12, 1988, pp.44-55

Camps, J.P., Jauberthie, R. and Rendell, F., “The Influence of Surface Absorption on Sulphate Attack”, “Concrete Durability and Repair Technology”, Edited by Dhir, R.K. and McCarthy, M.J., pp 197-207.

Nagele, E., “New and Powerful Method for the Evaluation of Multi Parameter Corrosion Tests”, Cement and Concrete Research, Vol. 25, No. 6, 1995, pp.1209-1217.

Mehta, P.K., “Effect of Fly Ash Composition on Sulfate Resistance of Cement”, A .C.I. Materials Journal, Vol. 83, No. 6, 1986, pp. 994-1000.

ASTM C 204-92, Test for fineness of Portland cement by Air Permeability Apparatus.

IS:383-1970, “Specification for coarse and fine aggregates from natural sources for concrete”, Bureau of Indian Standards, New Delhi.

IS:3812-2003 (Part1), “Specification for Fly Ash for use as pozzolana and admixture”, Bureau of Indian Standards, New Delhi.


Refbacks

  • There are currently no refbacks.