Related Articles

• Cause of distress of an old building through analytical and micro‒analytical methods ‒ a case study
  Rajappan Preetha, Kalpana Kumari, Balakrishnan Sakthi, Chandrasekharan Nair Harikumar, Haneef Ibrahim Abdul Gani
  Challenge Journal of Concrete Research Letters (2023) 14(1) 18-30
  The case study pertains to the methods such as nondestructive, semi-destructive, chemical, electrochemical and micro-analytical, utilized to assess the cause of cracking and spallation of a reinforced concrete building near to the eastern coastline of India. C...
• The mechanical properties of cement mortar reinforced with silica fume subjected to sulfate and chloride environment
  Sulaiman Al-Safi, Abdulghani Altharehi, Ibrahim A. Alameri, Abdulmalek Al-Jolahy
  Challenge Journal of Structural Mechanics (2025) 11(1) 55-69
  This study investigates the effect of incorporating micro-sized silica fume on the mechanical properties and durability of cement mortar when exposed to sulfate and chloride environments. Mortar samples were prepared by replacing cement with micro-sized silica...
• Investigation of the effects of re-curing on mechanical properties of basalt-polypropylene hybrid fiber concretes after exposure to high temperature
  Yunus Urtekin, Zinnur Çelik
  Challenge Journal of Structural Mechanics (2025) 11(1) 14-23
  Fiber reinforced concretes have attracted significant attention in recent decades due to their superior flexural and toughness properties compared to traditional concrete in civil engineering structures. In addition, cementitious materials can undergo signific...
• Impact of iron powder and blast furnace slag on the mechanical properties of polymer concrete: An experimental and hyperparameter-tuned ANN-based study
  Arif Ulu, Ali Ikbal Tutar, Mohsen Shams, Ferit Cakir
  Challenge Journal of Structural Mechanics (2024) 10(4) 149-158
  Polymer-based materials have become increasingly used in concrete production and various engineering applications due to their versatile properties. In particular, polymer concrete (PC) has become a preferred reinforcement material in the construction industry...
• Effect of carbon fibers on the mechanical properties of steam-cured concrete
  Mehmet Canbaz, Mouad Bensaoud, Hakan Erol, H. Selim Şengel
  Challenge Journal of Structural Mechanics (2022) 8(2) 38-46
  While the use of the steam-curing method in the precast concrete can result in an early high compressive strength and thus can increase the production rate of structural elements, it should be noted that the steam-curing method has some negative effects on the...