Related Articles

• Predictive modelling of acoustic emission signal data for corrosion assessment: A modified dimensional analysis based approach
  Shilpa Vishal Patil
  Challenge Journal of Concrete Research Letters (2025) 16(3) 125-132
  Acoustic emission (AE) technique has been proved as a powerful technique for structural health monitoring. AE technique can also be efficiently used for evaluation of corrosion activity in concrete. Despite its advantages, an effective analysis of data recorde...
• Predicting shear strength in reinforced concrete deep beams through finite element modeling of diverse concrete materials
  Erkan Polat, Gökhan Karaman
  Challenge Journal of Structural Mechanics (2025) 11(1) 24-41
  This study investigates the prediction of the strength of reinforced concrete deep beams, critical components in urban infrastructure, by evaluating their load-carrying capacities through finite element modeling and nonlinear inelastic analyses using LS-DYNA s...
• Impact of iron powder and blast furnace slag on the mechanical properties of polymer concrete: An experimental and hyperparameter-tuned ANN-based study
  Arif Ulu, Ali Ikbal Tutar, Mohsen Shams, Ferit Cakir
  Challenge Journal of Structural Mechanics (2024) 10(4) 149-158
  Polymer-based materials have become increasingly used in concrete production and various engineering applications due to their versatile properties. In particular, polymer concrete (PC) has become a preferred reinforcement material in the construction industry...
• Impact of composite columns on soft and weak storey irregularities in buildings without ground floor infill walls
  Yusuf Yıldız, Fethi Şermet
  Challenge Journal of Structural Mechanics (2025) 11(2) 70-81
  In buildings without infill walls on the ground floor, structural irregularities, such as soft and weak storey irregularities can significantly reduce their resilience to earthquakes. These irregularities arise from insufficient lateral stiffness and strength ...
• Improving bond performance of 3D-printable earth-based mortar reinforced with jute fibers
  Yeşim Tarhan, İsmail Hakkı Tarhan, Arnaud Perrot
  Challenge Journal of Structural Mechanics (2025) 11(2) 99-105
  3D printing technology has transformed the construction industry by enabling rapid and cost-effective production of complex geometries. However, it faces significant challenges, including sustainability concerns due to cement's environmental impact and reinfor...