Research Articles | Challenge Journal of Concrete Research Letters

The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader).

If you would like more information about how to print, save, and work with PDFs, Highwire Press provides a helpful Frequently Asked Questions about PDFs.

Alternatively, you can download the PDF file directly to your computer, from where it can be opened using a PDF reader. To download the PDF, click the Download link above.

Fullscreen Fullscreen Off

Related Articles

  • Production of durable high strength flowable mortar reinforced with hybrid fibers
    Eethar Thanon Dawood, Mahyuddin Ramli
    Challenge Journal of Concrete Research Letters (2018) 9(1) 10-20
    This study deals with the production of durable high strength flowable mortar (HSFM). Firstly, the optimum percentage of silica fume was determined due to Pozzolanic Activity Index (P.A.I) test. Secondly, the selected mortar reinforced by different percentages...
  • FRP-RC/PC members subjected to combined actions
    A. Ghani Razaqpur, Francesco Bencardino, Lidia Rizzuti, Giuseppe Spadea
    Challenge Journal of Structural Mechanics (2015) 1(1) 1-8
    The capacity provisions of conventional Reinforced Concrete (RC) and Prestressed Concrete (PC) beams subjected to combined action of torsion, shear and flexure are well known and stated by international/national codes. Similar provisions lack for concrete memb...
  • Dynamic response property of cooling tower structures
    Takashi Hara
    Challenge Journal of Structural Mechanics (2015) 1(1) 38-41
    Reinforced concrete (R/C) cooling tower structures have been used for cooling down the hot water produced by power or chemical plants. These structures are designed to prevent against the failure under a self-weight and a wind loading, as well as an earthquake...
  • The effect of build direction on component strength in SLA-based additive manufacturing
    Hojjat Ghahramanzadeh Asl, Derya Karaman
    Challenge Journal of Structural Mechanics (2024) 10(3) 95-100
    Nowadays additive manufacturing is frequently used, especially in industrial applications such as aerospace and biomedical. In the additive manufacturing method, thanks to the layered manufacturing technique, it enables the production of components with all ki...
  • Ultimate drift ratio prediction of steel plate shear wall systems: a machine learning approach
    Muhammed Gürbüz, İlker Kazaz
    Challenge Journal of Structural Mechanics (2024) 10(2) 34-46
    Predicting the ultimate drift ratio of steel plate shear wall (SPSW) systems is important for ensuring the structural integrity and performance of these systems under lateral loads. In this study, machine learning models are developed for predicting the ultima...