Email this article Effect of polyethylene terephthalate granules on nano-CaCO3-blended concrete
DOI: https://doi.org/10.20528/cjcrl.2026.01.001
View Counter: Abstract | 354 times | ‒ Full Article | 150 times |
Full Text:
PDFAbstract
This study explores the effects of partially replacing fine aggregate with 10% polyethylene terephthalate granules (PET) and cement with varying amounts (0–5%) of nano calcium carbonate (CaCO3) in M40 grade concrete. Concrete mixes were tested for workability, density, compressive strength, tensile strength, and flexural strength. Microstructural characteristics were examined using Scanning Electron Microscopy (SEM) and X-Ray Diffraction (XRD), while ANSYS simulations were used to validate compressive strength results. The results indicated that the optimal performance was achieved at 2% nano-CaCO3 replacement along with 10% PET. Although workability and density slightly declined with increasing CaCO3 content, compressive and tensile strengths showed only minor reductions, reflecting the limited reactivity of CaCO3. On the other hand, the addition of PET improved flexural strength and toughness, though these benefits reduced gradually at higher CaCO3 levels. SEM and XRD analyses confirmed uniform dispersion and the presence of crystalline phases, while ANSYS simulations closely matched experimental results, reinforcing the validity of the findings. The study is limited to M40 grade concrete and specific replacement levels. However, the findings suggest that combining PET waste and nano-CaCO3 can enhance mechanical performance while contributing to environmental benefits by reducing plastic waste and CO₂ emissions. Further research is needed for broader application and lifecycle assessment.
Keywords
References
Abu-Saleem M, Zhuge Y, Hassanli R, Ellis M, Rahman MM, Levett P (2021). Microwave radiation treatment to improve the strength of recycled plastic aggregate concrete. Case Studies in Construction Materials, 15, e00728.
Almeshal I, Tayeh B A, Alyousef R, Alabduljabbar H, Mohamed AM (2020). Eco-friendly concrete containing recycled plastic as partial replacement for sand. Journal of Materials Research and Technology, 9(3), 4631-4643.
Andrew RM (2018). Global CO2 emissions from cement production. Earth System Science Data, 10, 195–217.
Asha S, Resmi PR (2015). Experimental research on concrete with straight and crimped waste plastic fibres. International Journal of Engineering Sciences & Emerging Technologies, 8(2), 55-71.
Aslani H, Pashmtab P, Shaghaghi A, Mohammadpoorasl A, Taghipour H, Zarei M (2021). Tendencies towards bottled drinking water consumption: Challenges ahead of polyethylene terephthalate (PET) waste management. Health Promotion Perspectives, 11(1), 60-68.
Azhdarpour AM, Nikoudel, MR, Taheri M (2016). The effect of using polyethylene terephthalate particles on physical and strength-related properties of concrete; a laboratory evaluation. Construction and Building Materials, 109, 55-62.
Bamigboye GO, Tarverdi K, Umoren A, Bassey DE, Okorie U, Adediran J (2021). Evaluation of eco-friendly concrete having waste PET as fine aggregates. Cleaner Materials, 2, 100026.
Batuecas E, Liendo F, Tommasi T, Bensaid S, Deorsola FA, Fino D (2021). Recycling CO2 from flue gas for CaCO3 nanoparticles production as cement filler: A life cycle assessment. Journal of CO2 Utilization, 45, 101446.
Camiletti J, Soliman, AM, Nehdi ML (2013). Effects of nano- and micro-limestone addition on early-age properties of ultra-high-performance concrete. Materials and Structures/Materiaux et Constructions, 46, 881–898.
Cao M, Ming X, He K, Li L, Shen S (2019). Effect of macro-, micro-and nano-calcium carbonate on properties of cementitious composites—A review. Materials, 12(5), 781.
Choi YW, Moon DJ, Chung JS, Cho SK (2005). Effects of waste PET bottles aggregate on the properties of concrete. Cement and Concrete Research, 35(4), 776-781.
d’Amora M, Liendo F, Deorsola FA, Bensaid S, Giordani S (2020). Toxicological profile of calcium carbonate nanoparticles for industrial applications. Colloids and Surfaces B: Biointerfaces, 190, 110947.
Daniyal M, Akhtar S, Azam A (2019). Effect of nano-TiO2 on the properties of cementitious composites under different exposure environments. Journal of Materials Research and Technology, 8, 6158–6172.
Dawood AO, Hayder AK, Falih RS (2021). Physical and mechanical properties of concrete containing PET wastes as a partial replacement for fine aggregates. Case Studies in Construction Materials, 14, e00482.
Frigione M (2010). Recycling of PET bottles as fine aggregate in concrete. Waste Management, 30(6), 1101-1106.
Hashim AM, Nhabah HT (2018). Influence of CACO3 with nanoparticles on the mechanical characteristics and concrete microstructure. International Journal of Civil Engineering and Technology, 9, 799–808.
Ismail ZZ, Al-Hashmi EA (2008). Use of waste plastic in concrete mixture as aggregate replacement. Waste Management, 28(11), 2041-2047.
Limami H, Manssouri I, Cherkaoui K, Saadaoui M, Khaldoun A (2020). Thermal performance of unfired lightweight clay bricks with HDPE & PET waste plastics additives. Journal of Building Engineering, 30, 101251.
Marangu JM, Thiong’o JK, Wachira JM (2019). Review of carbonation resistance in hydrated cement based materials. Journal of Chemistry, 2019(1), 8489671.
Moghadam MA, Mokhtarani N, Mokhtarani B (2009). Municipal solid waste management in Rasht City, Iran. Waste Management, 29(1), 485-489.
Pezzi L, De Luca PA, Vuono D, Chiappetta F, Nastro A (2006). Concrete products with waste's plastic material (bottle, glass, plate). In: Materials Science Forum, 514-516, 1753-0.
Rahmani E, Dehestani M, Beygi MHA, Allahyari H, Nikbin IM (2013). On the mechanical properties of concrete containing waste PET particles. Construction and Building Materials, 47, 1302-1308.
Saikia N, De Brito, J (2014). Mechanical properties and abrasion behaviour of concrete containing shredded PET bottle waste as a partial substitution of natural aggregate. Construction and Building Materials, 52, 236-244.
Siddique R, Khatib J, Kaur I (2008). Use of recycled plastic in concrete: A review. Waste Management, 28(10), 1835-1852.
Srivastava A, Mishra A, Singh S (2025). Mechanical and durability study of nano-SiO2 and nano-TiO2 on fiber reinforced concrete. Challenge Journal of Concrete Research Letters, 16(1), 33-39.
Srivastava A, Mishra A, Singh, SK (2025). Effect of nano TiO2 and reinforcement of polypropylene fiber in standard concrete: an experimental and numerical approach. Canadian Journal of Civil Engineering, 52(5), 929-945.
Supit SWM, Shaikh FUA (2014). Effect of Nano-CaCO3 on compressive strength development of high volume fly ash mortars and concretes. Journal of Advanced Concrete Technology, 12, 178–186.
