Related Articles

• Effects of structural irregularities on low and mid-rise RC building response
  Hüseyin Bilgin, Rezarta Uruçi
  Challenge Journal of Structural Mechanics (2018) 4(2) 33-44
  During the recent earthquakes, it has been observed that structural irregularities are one of the main reasons of the building damage. Irregularities are weak points in a building which may cause failure of one element or total collapse of the building during ...
• Mechanical characterization of FDM-printed PLA: Role of infill geometry and build direction
  Tevfik Oğuzhan Ergüder, Caner Bulut
  Challenge Journal of Structural Mechanics (2025) 11(4) 201-214
  This study examines the mechanical behavior of polylactic acid (PLA) components produced via Fused Deposition Modeling (FDM), focusing on the effects of infill geometry and build orientation on tensile strength and deformation. Three infill patterns‒Cubic Subd...
• Nonlinear in-plane response of 3D-printed concrete walls with varied infill patterns: Experimental mix design and numerical structural assessment
  İsmail Hakkı Tarhan, Yeşim Tarhan
  Challenge Journal of Structural Mechanics (2025) 11(3) 160-173
  This study investigates the nonlinear in-plane structural behavior of 3D-printed concrete wall elements with two representative internal infill patterns ‒ lattice (L) and triangular (T) ‒ using finite element modeling informed by experimentally derived materia...
• Seismic performance assessment of timber-framed (hımış) structures with different infill materials
  Muhammed Alperen Ozdemir
  Challenge Journal of Structural Mechanics (2025) 11(3) 149-159
  This study investigates the seismic performance of traditional timber-framed (hımış) structures incorporating different types of infill materials through advanced nonlinear finite element modeling. Timber-infilled walls represent a widely used hybrid construct...
• Long-term durability of red mud-modified cement mortars: Effects of high temperature and freeze-thaw cycles
  Emrah Turan, Ibrahim A. Alameri, Meral Oltulu
  Challenge Journal of Structural Mechanics (2025) 11(3) 116-127
  The use of industrial by-products such as red mud in cementitious materials addresses sustainability by reducing environmental impact and improving performance. As a hazardous waste from aluminium production, red mud offers a promising solution for waste manag...