Cover & Contents Vol.6 No.3

Full Text:

Related Articles

• Nonlinear in-plane response of 3D-printed concrete walls with varied infill patterns: Experimental mix design and numerical structural assessment
  İsmail Hakkı Tarhan, Yeşim Tarhan
  Challenge Journal of Structural Mechanics (2025) 11(3) 160-173
  This study investigates the nonlinear in-plane structural behavior of 3D-printed concrete wall elements with two representative internal infill patterns ‒ lattice (L) and triangular (T) ‒ using finite element modeling informed by experimentally derived materia...
• Improving bond performance of 3D-printable earth-based mortar reinforced with jute fibers
  Yeşim Tarhan, İsmail Hakkı Tarhan, Arnaud Perrot
  Challenge Journal of Structural Mechanics (2025) 11(2) 99-105
  3D printing technology has transformed the construction industry by enabling rapid and cost-effective production of complex geometries. However, it faces significant challenges, including sustainability concerns due to cement's environmental impact and reinfor...
• Investigating the effects of glass fiber in enhancing concrete pavement performance
  Fatih İrfan Baş
  Challenge Journal of Structural Mechanics (2025) 11(1) 42-54
  Flexible pavements are considered more sustainable than concrete pavements primarily due to the higher long-term maintenance and rehabilitation costs associated with concrete pavements. Concrete pavements possess a higher modulus of elasticity, which allows th...
• Investigation of the effects of re-curing on mechanical properties of basalt-polypropylene hybrid fiber concretes after exposure to high temperature
  Yunus Urtekin, Zinnur Çelik
  Challenge Journal of Structural Mechanics (2025) 11(1) 14-23
  Fiber reinforced concretes have attracted significant attention in recent decades due to their superior flexural and toughness properties compared to traditional concrete in civil engineering structures. In addition, cementitious materials can undergo signific...
• Experimental study on the mechanical performance of polypropylene fiber-reinforced concrete incorporating palm oil fuel ash as partial cement replacement
  Alaa Omar Tanash, Ahmed Mokhtar Albshir Budiea, Mohd Faizal Md Jaafar, Khairunisa Muthusamy, Fahrizal Zulkarnain
  Challenge Journal of Concrete Research Letters (2025) 16(3) 115-124
  Environmental pollution caused by the disposal of palm oil fuel ash, a type of waste from the palm oil trade, needs to be resolved. At the same time, activities involved in the manufacturing of cement, which is the primary binder in commonly used concrete, hav...