Cover & Contents Vol.8 No.4

Full Text:

Related Articles

• Design and finite element analysis of a novel auxetic structure
  Süleyman Nazif Orhan, Şeydanur Erden
  Challenge Journal of Structural Mechanics (2022) 8(4) 159-165
  In this study, a novel auxetic structure, namely RDN, is presented in two- and three-dimensions. The unit cells are created by modifying the conventional re-entrant structure and the 2D and 3D structures are formed by multiplying these unit cells. Finite eleme...
• Performance-based seismic design of laterally braced steel frames
  Sulaiman Al-Safi, Ibrahim A. Alameri, Saad Abdo Noaman Ezzedine, Muaadh Qaid Alwalidi
  Challenge Journal of Structural Mechanics (2022) 8(4) 141-149
  Improving the performance of structural frames is one of the most important focuses of today's researchers. The total base shear capacity of the structural frames will increase by reaching the maximum number of plastic hinges. In this work, the effects of brac...
• Nonlinear in-plane response of 3D-printed concrete walls with varied infill patterns: Experimental mix design and numerical structural assessment
  İsmail Hakkı Tarhan, Yeşim Tarhan
  Challenge Journal of Structural Mechanics (2025) 11(3) 160-173
  This study investigates the nonlinear in-plane structural behavior of 3D-printed concrete wall elements with two representative internal infill patterns ‒ lattice (L) and triangular (T) ‒ using finite element modeling informed by experimentally derived materia...
• Improving bond performance of 3D-printable earth-based mortar reinforced with jute fibers
  Yeşim Tarhan, İsmail Hakkı Tarhan, Arnaud Perrot
  Challenge Journal of Structural Mechanics (2025) 11(2) 99-105
  3D printing technology has transformed the construction industry by enabling rapid and cost-effective production of complex geometries. However, it faces significant challenges, including sustainability concerns due to cement's environmental impact and reinfor...
• Experimental study on the mechanical performance of polypropylene fiber-reinforced concrete incorporating palm oil fuel ash as partial cement replacement
  Alaa Omar Tanash, Ahmed Mokhtar Albshir Budiea, Mohd Faizal Md Jaafar, Khairunisa Muthusamy, Fahrizal Zulkarnain
  Challenge Journal of Concrete Research Letters (2025) 16(3) 115-124
  Environmental pollution caused by the disposal of palm oil fuel ash, a type of waste from the palm oil trade, needs to be resolved. At the same time, activities involved in the manufacturing of cement, which is the primary binder in commonly used concrete, hav...