Cover & Contents Vol.11 No.4

Full Text:

Related Articles

• Mechanical characterization of FDM-printed PLA: Role of infill geometry and build direction
  Tevfik Oğuzhan Ergüder, Caner Bulut
  Challenge Journal of Structural Mechanics (2025) 11(4) 201-214
  This study examines the mechanical behavior of polylactic acid (PLA) components produced via Fused Deposition Modeling (FDM), focusing on the effects of infill geometry and build orientation on tensile strength and deformation. Three infill patterns‒Cubic Subd...
• A discrete element method for evaluating the seismic performance of concrete gravity dam-reservoir systems under main shock-aftershock events
  Berat Feyza Soysal
  Challenge Journal of Structural Mechanics (2025) 11(4) 229-244
  Dams are crucial for water supply, flood prevention, and hydroelectric power generation. Often located in seismically active regions, they are vulnerable to main shock-aftershock (MS-AS) sequences, which can compromise structural integrity and hydraulic safety...
• Nonlinear in-plane response of 3D-printed concrete walls with varied infill patterns: Experimental mix design and numerical structural assessment
  İsmail Hakkı Tarhan, Yeşim Tarhan
  Challenge Journal of Structural Mechanics (2025) 11(3) 160-173
  This study investigates the nonlinear in-plane structural behavior of 3D-printed concrete wall elements with two representative internal infill patterns ‒ lattice (L) and triangular (T) ‒ using finite element modeling informed by experimentally derived materia...
• Improving bond performance of 3D-printable earth-based mortar reinforced with jute fibers
  Yeşim Tarhan, İsmail Hakkı Tarhan, Arnaud Perrot
  Challenge Journal of Structural Mechanics (2025) 11(2) 99-105
  3D printing technology has transformed the construction industry by enabling rapid and cost-effective production of complex geometries. However, it faces significant challenges, including sustainability concerns due to cement's environmental impact and reinfor...
• Experimental study on the mechanical performance of polypropylene fiber-reinforced concrete incorporating palm oil fuel ash as partial cement replacement
  Alaa Omar Tanash, Ahmed Mokhtar Albshir Budiea, Mohd Faizal Md Jaafar, Khairunisa Muthusamy, Fahrizal Zulkarnain
  Challenge Journal of Concrete Research Letters (2025) 16(3) 115-124
  Environmental pollution caused by the disposal of palm oil fuel ash, a type of waste from the palm oil trade, needs to be resolved. At the same time, activities involved in the manufacturing of cement, which is the primary binder in commonly used concrete, hav...