Related Articles

• Bio-based cementitious composites reinforced with natural fibers derived from Cedrus libani A.Rich. acicular leaf: Extraction, microstructural characterization, and mechanical performance after thermal exposure
  Fatih Şamdan, Canan Şamdan, Mehmet Canbaz
  Challenge Journal of Concrete Research Letters (2026) 17(2) 162-176
  This study investigates the physical and mechanical performance of bio-based cementitious composites produced with natural fibers obtained from dried, fallen acicular leaf of Cedrus libani A.Rich. The fibers underwent a multi-stage pre-treatment prior to compo...
• Mechanical properties assessment of recycled brick aggregate concrete using demolition waste from century-old masonry buildings in Nepal
  Bipul Niroula, Mahesh Raj Bhatt
  Challenge Journal of Concrete Research Letters (2026) 17(1) 41-56
  This study explores the potential of recycling bricks from dismantled old buildings into brick aggregates and utilizing them as coarse aggregates in recycled brick aggregate concrete. Nepal, being susceptible to seismic events, generates large amounts of const...
• Optimum design of reinforced concrete beam sections with JAYA algorithm
  Yasin Duysak, Sinan Melih Nigdeli, Gebrail Bekdaş
  Challenge Journal of Concrete Research Letters (2024) 15(4) 134-141
  Section design is an important process for designing reinforced concrete structures because of the existence of factors such as bearing capacity and cost. After defining the initial cross sections for reinforced concrete elements, reinforcement amounts are cal...
• A different approach for green concrete production: Determination of the effect of e-waste and waste rubber powder on durability properties of concrete
  H. Alperen Bulut
  Challenge Journal of Concrete Research Letters (2024) 15(3) 69-81
  This study was carried out to present a different approach to green concrete production by utilizing electronic waste (e-waste) and waste rubber powders in order to provide a solution to both the cost and carbon footprint problems arising from the rapid consum...
• Investigating Iosipescu shear properties of laser powder bed fusion 316L stainless steel via digital image correlation technique
  Elanur Çelebi Kavdır, Gürkan Kaya, Yusuf Polat
  Challenge Journal of Structural Mechanics (2026) 12(1) 45-54
  Laser Powder Bed Fusion (LPBF) has been widely adopted for producing stainless steel 316L components with complex geometries; however, despite extensive research on its tensile performance, the shear behavior of LPBF 316L remains insufficiently characterized. ...