Related Articles

• Seismic hazard and risk analyses of historical masonry structures in Kocaeli, Türkiye
  Yusuf Kahraman, Ferit Cakir, Abdullah Can Zulfikar, Methiye Gundogdu Gok
  Challenge Journal of Structural Mechanics (2026) 12(1) 1-21
  Protection of masonry structures is among the most important building groups around the world. Generally constructed of heavy materials such as stone and brick, these structures are highly seismically vulnerable. In large earthquakes, masonry structures that h...
• Investigating Iosipescu shear properties of laser powder bed fusion 316L stainless steel via digital image correlation technique
  Elanur Çelebi Kavdır, Gürkan Kaya, Yusuf Polat
  Challenge Journal of Structural Mechanics (2026) 12(1) 45-54
  Laser Powder Bed Fusion (LPBF) has been widely adopted for producing stainless steel 316L components with complex geometries; however, despite extensive research on its tensile performance, the shear behavior of LPBF 316L remains insufficiently characterized. ...
• Mechanical characterization of FDM-printed PLA: Role of infill geometry and build direction
  Tevfik Oğuzhan Ergüder, Caner Bulut
  Challenge Journal of Structural Mechanics (2025) 11(4) 201-214
  This study examines the mechanical behavior of polylactic acid (PLA) components produced via Fused Deposition Modeling (FDM), focusing on the effects of infill geometry and build orientation on tensile strength and deformation. Three infill patterns‒Cubic Subd...
• Nonlinear in-plane response of 3D-printed concrete walls with varied infill patterns: Experimental mix design and numerical structural assessment
  İsmail Hakkı Tarhan, Yeşim Tarhan
  Challenge Journal of Structural Mechanics (2025) 11(3) 160-173
  This study investigates the nonlinear in-plane structural behavior of 3D-printed concrete wall elements with two representative internal infill patterns ‒ lattice (L) and triangular (T) ‒ using finite element modeling informed by experimentally derived materia...
• Optimal metaheuristic design of CFRP wrapping for enhancing the shear capacity of reinforced concrete columns
  Ammar Khalbous, Gebrail Bekdaş, Sinan Melih Nigdeli, Aylin Ece Kayabekir
  Challenge Journal of Structural Mechanics (2026) 12(1) 55-64
  Reinforced concrete (RC) columns are prone to brittle shear failure under lateral loads like earthquakes, especially in older structures. Carbon fiber reinforced polymer (CFRP) wrapping effectively enhances shear capacity, ductility, and energy dissipation. Th...