Email this article The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader).
If you would like more information about how to print, save, and work with PDFs, Highwire Press provides a helpful Frequently Asked Questions about PDFs.
Alternatively, you can download the PDF file directly to your computer, from where it can be opened using a PDF reader. To download the PDF, click the Download link above.
Related Articles
-
Yasin Duysak, Sinan Melih Nigdeli, Gebrail BekdaşChallenge Journal of Concrete Research Letters (2024) 15(4) 134-141Section design is an important process for designing reinforced concrete structures because of the existence of factors such as bearing capacity and cost. After defining the initial cross sections for reinforced concrete elements, reinforcement amounts are cal...
-
Serdal Ünal, Ahmet Burak Kurt, Mehmet CanbazChallenge Journal of Concrete Research Letters (2025) 16(3) 133-141In this study, the effect of carbon fiber reinforced polymer (CFRP) wrapping on the compressive and bending behavior of damaged reinforced concrete structural elements located in high earthquake risk areas was investigated in detail. The main objective was to ...
-
H. Alperen BulutChallenge Journal of Concrete Research Letters (2024) 15(3) 69-81This study was carried out to present a different approach to green concrete production by utilizing electronic waste (e-waste) and waste rubber powders in order to provide a solution to both the cost and carbon footprint problems arising from the rapid consum...
-
Sudhakaran Arumugam, Vijayaprabha Chakrawarthi, Manicka Mamallan AndavarChallenge Journal of Concrete Research Letters (2025) 16(3) 155-163This paper presents a case study of a deflection challenge in a profiled steel deck slab subjected to heavy concrete loads, as observed during a field investigation. In recent decades, such slabs have gained popularity in both the construction and industrial s...
-
Lyubomir A. ZdravkovChallenge Journal of Structural Mechanics (2024) 10(3) 101-108The silos and vertical cylindrical tanks of small volumes are often built in batteries, at short distances between them. As a result of their close location, the wind load on them increases. In the European standard EN 1991-1-4:2005+A1:2010 exists a methodolog...
