Related Articles

• Influence of blast-induced ground motion on dynamic response of masonry minaret of Yörgüç Paşa Mosque
  Olgun Köksal, Kemal Hacıefendioğlu, Emre Alpaslan, Fahri Birinci
  Challenge Journal of Structural Mechanics (2017) 3(1) 31-37
  This paper focuses on the dynamic response analysis of masonry minaret of Yörgüç Paşa Mosque subjected to artificially generated surface blast-induced ground motion by using a three-dimensional finite element model. The mosque is located in the town of Kavak o...
• Metaheuristic approaches for optimum design of cantilever reinforced concrete retaining walls
  Gebrail Bekdaş, Rasim Temür
  Challenge Journal of Structural Mechanics (2017) 3(1) 23-30
  An approach is presented for optimum design of cantilever reinforced concrete (RC) retaining wall via teaching-learning based optimization (TLBO) algorithm. The objective function of the optimization is to minimize total material cost including concrete and re...
• Mechanical characterization of FDM-printed PLA: Role of infill geometry and build direction
  Tevfik Oğuzhan Ergüder, Caner Bulut
  Challenge Journal of Structural Mechanics (2025) 11(4) 201-214
  This study examines the mechanical behavior of polylactic acid (PLA) components produced via Fused Deposition Modeling (FDM), focusing on the effects of infill geometry and build orientation on tensile strength and deformation. Three infill patterns‒Cubic Subd...
• Nonlinear in-plane response of 3D-printed concrete walls with varied infill patterns: Experimental mix design and numerical structural assessment
  İsmail Hakkı Tarhan, Yeşim Tarhan
  Challenge Journal of Structural Mechanics (2025) 11(3) 160-173
  This study investigates the nonlinear in-plane structural behavior of 3D-printed concrete wall elements with two representative internal infill patterns ‒ lattice (L) and triangular (T) ‒ using finite element modeling informed by experimentally derived materia...
• Analytical solution for bending and buckling response of laminated non-homogeneous plates using a simplified-higher order theory
  Ferruh Turan, Muhammed Fatih Başoğlu, Zihni Zerin
  Challenge Journal of Structural Mechanics (2017) 3(1) 1-16
  In this study, analytical solutions for the bending and buckling analysis of simply supported laminated non-homogeneous composite plates based on first and simplified-higher order theory are presented. The simplified-higher order theory assumes that the in-pla...