Research Articles | Challenge Journal of Structural Mechanics

The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader).

If you would like more information about how to print, save, and work with PDFs, Highwire Press provides a helpful Frequently Asked Questions about PDFs.

Alternatively, you can download the PDF file directly to your computer, from where it can be opened using a PDF reader. To download the PDF, click the Download link above.

Fullscreen Fullscreen Off

Related Articles

  • Production of durable high strength flowable mortar reinforced with hybrid fibers
    Eethar Thanon Dawood, Mahyuddin Ramli
    Challenge Journal of Concrete Research Letters (2018) 9(1) 10-20
    This study deals with the production of durable high strength flowable mortar (HSFM). Firstly, the optimum percentage of silica fume was determined due to Pozzolanic Activity Index (P.A.I) test. Secondly, the selected mortar reinforced by different percentages...
  • FRP-RC/PC members subjected to combined actions
    A. Ghani Razaqpur, Francesco Bencardino, Lidia Rizzuti, Giuseppe Spadea
    Challenge Journal of Structural Mechanics (2015) 1(1) 1-8
    The capacity provisions of conventional Reinforced Concrete (RC) and Prestressed Concrete (PC) beams subjected to combined action of torsion, shear and flexure are well known and stated by international/national codes. Similar provisions lack for concrete memb...
  • Dynamic response property of cooling tower structures
    Takashi Hara
    Challenge Journal of Structural Mechanics (2015) 1(1) 38-41
    Reinforced concrete (R/C) cooling tower structures have been used for cooling down the hot water produced by power or chemical plants. These structures are designed to prevent against the failure under a self-weight and a wind loading, as well as an earthquake...
  • Influencing factors on effective width of compressed zone in joint column - cylindrical shell of steel silo
    Lyubomir Zdravkov
    Challenge Journal of Structural Mechanics (2018) 4(1) 1-8
    In order to ensure unloading of whole amount of stored product by gravity, steel silos are often placed on supporting structure. The simplest way to design these complicated facilities is to divide cylindrical shell on two parts in our minds - discretely suppo...
  • Influence of the distance between vertical cylinders positioned in a row on the wind load on them
    Lyubomir A. Zdravkov
    Challenge Journal of Structural Mechanics (2024) 10(3) 101-108
    The silos and vertical cylindrical tanks of small volumes are often built in batteries, at short distances between them. As a result of their close location, the wind load on them increases. In the European standard EN 1991-1-4:2005+A1:2010 exists a methodolog...