Related Articles

• Reinforcement corrosion in coastal and marine concrete: A review
  Saha Dauji
  Challenge Journal of Concrete Research Letters (2018) 9(2) 62-70
  Concrete is used as a structural material for construction of buildings, jetties, harbors, etc. in many coastal and marine locations. The reinforcement used in concrete is susceptible to corrosion, resulting in loss of steel area, loss of bond, expansion of th...
• Abrasion Resistance of Concrete – Design, Construction and Case Study
  Benjamin D. Scott, Md. Safiuddin
  Challenge Journal of Concrete Research Letters (2015) 6(3)
  One of the most common forms of deterioration imposed on concrete structures is surface abrasion. This mechanical wearing can be a catalyst for other forms of deterioration such as cracking and corrosion of reinforcing steel. This report is intended to discuss...
• A comparative study on the structural performance of an RC building based on updated seismic design codes: case of Turkey
  Ercan Işık
  Challenge Journal of Structural Mechanics (2021) 7(3) 123-134
  The destructive earthquakes and structural damages reveal the importance of the rules of earthquake-resistant structural design. The need of update and renewal of these rules periodically become inevitable as a result of scientific developments, innovations in...
• A different approach for green concrete production: Determination of the effect of e-waste and waste rubber powder on durability properties of concrete
  H. Alperen Bulut
  Challenge Journal of Concrete Research Letters (2024) 15(3) 69-81
  This study was carried out to present a different approach to green concrete production by utilizing electronic waste (e-waste) and waste rubber powders in order to provide a solution to both the cost and carbon footprint problems arising from the rapid consum...
• Optimization of reinforced concrete beam using hybrid algorithms with multi-objective function as CO2 emission and cost
  Muhammed Çoşut, Gebrail Bekdaş, Sinan Melih Nigdeli
  Challenge Journal of Concrete Research Letters (2023) 14(4) 96-106
  In this study, algorithms with two objective functions are defined considering the TS500 (2000) (Reinforced concrete structures design and construction rules) and TBDY (2018) (Turkey Building Earthquake Regulation) standards for rectangular beam design. These ...