Related Articles

• Effect of carbon fibers on the mechanical properties of steam-cured concrete
  Mehmet Canbaz, Mouad Bensaoud, Hakan Erol, H. Selim Şengel
  Challenge Journal of Structural Mechanics (2022) 8(2) 38-46
  While the use of the steam-curing method in the precast concrete can result in an early high compressive strength and thus can increase the production rate of structural elements, it should be noted that the steam-curing method has some negative effects on the...
• Effect of dosage on the mechanical properties of epscrete
  Mehmet Canbaz, Emir Günaltılı, Uğur Albayrak
  Challenge Journal of Structural Mechanics (2023) 9(3) 84-91
  Epscrete, which is made by employing aggregate made of expanded polystyrene beads, is often used to make wall panels, block components, and insulating plates. For these products to have greater mechanical qualities, 400, 600, and 800 dose epscrete specimens we...
• Determination of waste crushed baked clay aggregate concrete with granular composite material preparations
  Fatih Şamdan, İbrahim Çelikyürek, Mehmet Canbaz
  Challenge Journal of Concrete Research Letters (2024) 15(4) 112-119
  Waste baked clay is an industrial waste that causes environmental pollution. Therefore, the possible utilization of this material would reduce environmental pollution. Utilization of baked clay as aggregate in concrete would have a positive effect on the econo...
• Utilization of expired cement and aged roof tile powder in the production of sustainable geopolymer: Mechanical and physical properties
  Serdal Ünal, Mehmet Canbaz
  Challenge Journal of Structural Mechanics (2025) 11(2) 82-88
  This study deals with the production of geopolymer mortar in order to promote the recycling of waste materials as sustainable building materials. The use of waste materials such as expired cement and aged roof tiles powders in cementitious systems is of great ...
• Photocatalytic activation of fibrous lightweight polymer concrete surfaces under artificial light source
  Serdal Ünal, Mehmet Canbaz
  Challenge Journal of Concrete Research Letters (2025) 16(1) 15-24
  In general, surface contamination of building materials is caused by pollution, which can be divided into human-made and natural sources. Building materials whose surfaces are exposed to pollutants from these sources for a long time show chemical and physical ...