Related Articles

• Optimum design of reinforced concrete beam sections with JAYA algorithm
  Yasin Duysak, Sinan Melih Nigdeli, Gebrail Bekdaş
  Challenge Journal of Concrete Research Letters (2024) 15(4) 134-141
  Section design is an important process for designing reinforced concrete structures because of the existence of factors such as bearing capacity and cost. After defining the initial cross sections for reinforced concrete elements, reinforcement amounts are cal...
• Mechanical and durability study of nano-SiO2 and nano-TiO2 on fiber reinforced concrete
  Awadhesh Srivastava, Abhishek Mishra, Sachin Kumar Singh
  Challenge Journal of Concrete Research Letters (2025) 16(1) 33-39
  This work presents the results of an experimental investigation into the strength and durability properties of fiber-reinforced concretes that have polypropylene (PP) fibers added to the concrete by volume and nano-SiO2 (silicon dioxide) and nano-TiO2 (titaniu...
• Effect of hemp and basalt fiber on fracture energy of cement-based composites: a comparative study
  Adil Gultekin
  Challenge Journal of Concrete Research Letters (2023) 14(4) 107-117
  Fiber-reinforced composites are one of the most used construction materials. Nowadays, some types of fibers like steel, carbon, glass and basalt are commonly used in these composites. However, the production of these fibers consumes natural resources and a hig...
• Experimental study on the mechanical performance of polypropylene fiber-reinforced concrete incorporating palm oil fuel ash as partial cement replacement
  Alaa Omar Tanash, Ahmed Mokhtar Albshir Budiea, Mohd Faizal Md Jaafar, Khairunisa Muthusamy, Fahrizal Zulkarnain
  Challenge Journal of Concrete Research Letters (2025) 16(3) 115-124
  Environmental pollution caused by the disposal of palm oil fuel ash, a type of waste from the palm oil trade, needs to be resolved. At the same time, activities involved in the manufacturing of cement, which is the primary binder in commonly used concrete, hav...
• Investigation of the effects of re-curing on mechanical properties of basalt-polypropylene hybrid fiber concretes after exposure to high temperature
  Yunus Urtekin, Zinnur Çelik
  Challenge Journal of Structural Mechanics (2025) 11(1) 14-23
  Fiber reinforced concretes have attracted significant attention in recent decades due to their superior flexural and toughness properties compared to traditional concrete in civil engineering structures. In addition, cementitious materials can undergo signific...