Related Articles

• Determination of waste crushed baked clay aggregate concrete with granular composite material preparations
  Fatih Şamdan, İbrahim Çelikyürek, Mehmet Canbaz
  Challenge Journal of Concrete Research Letters (2024) 15(4) 112-119
  Waste baked clay is an industrial waste that causes environmental pollution. Therefore, the possible utilization of this material would reduce environmental pollution. Utilization of baked clay as aggregate in concrete would have a positive effect on the econo...
• Exploring deflection challenges: A case study on the influence of heavy concrete weight on profiled steel deck slabs
  Sudhakaran Arumugam, Vijayaprabha Chakrawarthi, Manicka Mamallan Andavar
  Challenge Journal of Concrete Research Letters (2025) 16(3) 155-163
  This paper presents a case study of a deflection challenge in a profiled steel deck slab subjected to heavy concrete loads, as observed during a field investigation. In recent decades, such slabs have gained popularity in both the construction and industrial s...
• A novel neuro genetic programming framework for modelling compressive strength of recycled aggregate concrete
  Preeti Kulkarni, Shreenivas N. Londhe, Pradnya R. Dixit
  Challenge Journal of Concrete Research Letters (2025) 16(4) 203-214
  Recycled Aggregate Concrete (RAC) can represent as a sustainable alternative to conventional concrete; however compressive strength prediction of RAC is difficult due to the complex and nonlinear interactions between the materials in the mix. Researchers have ...
• Influence of connector forces on the expansion configuration of a hexagonal modular floating structure
  Nur Hanani Ahmad Azlan, Nik Mohd Ridzuan Shaharuddin, Arifah Ali
  Challenge Journal of Structural Mechanics (2025) 11(2) 89-98
  The preliminary design of a hexagonal modular floating structure (HMFS) system includes two configurations: U-shaped and V-shaped, which link seven hexagonal modules that create a network of connectors. The connector force is a crucial consideration in the lay...
• Influence of the distance between vertical cylinders positioned in a row on the wind load on them
  Lyubomir A. Zdravkov
  Challenge Journal of Structural Mechanics (2024) 10(3) 101-108
  The silos and vertical cylindrical tanks of small volumes are often built in batteries, at short distances between them. As a result of their close location, the wind load on them increases. In the European standard EN 1991-1-4:2005+A1:2010 exists a methodolog...