Related Articles

• Impact of adjacent footings on immediate settlement of shallow footings
  Mustafa Aytekin
  Challenge Journal of Structural Mechanics (2016) 2(1) 1-6
  When the settlement of a footing under a structure is estimated by considering the bearing pressure of that footing only, the estimated value of the settlement may not be good enough since the other neighboring footings are going to effect the settlement of th...
• Evaluating effects of granulated glass on structural and seismic behavior of tall RC structures using experimental tests and 3D modeling
  Memduh Karalar, Murat Çavuşlu
  Challenge Journal of Structural Mechanics (2022) 8(2) 63-77
  The use of waste materials for reinforcement of reinforced concrete (RC) structures is of great importance for both environmental cleaning and recycling. In this study, the effects of granulated glass released by factories on the structural behavior of RC stru...
• Effect of carbon fibers on the mechanical properties of steam-cured concrete
  Mehmet Canbaz, Mouad Bensaoud, Hakan Erol, H. Selim Şengel
  Challenge Journal of Structural Mechanics (2022) 8(2) 38-46
  While the use of the steam-curing method in the precast concrete can result in an early high compressive strength and thus can increase the production rate of structural elements, it should be noted that the steam-curing method has some negative effects on the...
• Effect of dimensions of specimens on the impact performance of concrete
  Mohammed Gamal Al-Hagri, Shahed Husni Ben Issa Ebribesh, Fares Alamoudi, Abdulrahman Rakan Al Haj Ali
  Challenge Journal of Concrete Research Letters (2025) 16(2) 85-94
  Mechanical properties of concrete are size dependent. While many reports have discussed the size effect of the test specimen on the static properties of concrete, research on the effect of cross-sectional dimensions of the concrete beams on its impact performa...
• Photocatalytic activation of fibrous lightweight polymer concrete surfaces under artificial light source
  Serdal Ünal, Mehmet Canbaz
  Challenge Journal of Concrete Research Letters (2025) 16(1) 15-24
  In general, surface contamination of building materials is caused by pollution, which can be divided into human-made and natural sources. Building materials whose surfaces are exposed to pollutants from these sources for a long time show chemical and physical ...