Related Articles

• Shear capacity of post-installed anchors according to ACI318 and TS500
  Özlem Çalışkan, Salih Yılmaz, Hasan Kaplan
  Challenge Journal of Structural Mechanics (2016) 2(2) 69-74
  Applications of strengthening works have accelerated gradually due to earthquakes in recent years. Different strengthening methods are being used in order to bring the structures with insufficient strength to those levels specified by current codes. In most of...
• An experimental study on impact of anchor bars at the steel frames with infilled walls
  Atila Kumbasaroğlu, Ahmet Budak
  Challenge Journal of Structural Mechanics (2016) 2(2) 129-138
  In this study, a series of experimental study was conducted to investigate the effect of anchor bars on steel frame systems where the connections were provided by anchor bars between frame and infilled walls. Seven one over four scaled specimens having one sto...
• Mechanical characterization of FDM-printed PLA: Role of infill geometry and build direction
  Tevfik Oğuzhan Ergüder, Caner Bulut
  Challenge Journal of Structural Mechanics (2025) 11(4) 201-214
  This study examines the mechanical behavior of polylactic acid (PLA) components produced via Fused Deposition Modeling (FDM), focusing on the effects of infill geometry and build orientation on tensile strength and deformation. Three infill patterns‒Cubic Subd...
• Nonlinear in-plane response of 3D-printed concrete walls with varied infill patterns: Experimental mix design and numerical structural assessment
  İsmail Hakkı Tarhan, Yeşim Tarhan
  Challenge Journal of Structural Mechanics (2025) 11(3) 160-173
  This study investigates the nonlinear in-plane structural behavior of 3D-printed concrete wall elements with two representative internal infill patterns ‒ lattice (L) and triangular (T) ‒ using finite element modeling informed by experimentally derived materia...
• Seismic performance assessment of timber-framed (hımış) structures with different infill materials
  Muhammed Alperen Ozdemir
  Challenge Journal of Structural Mechanics (2025) 11(3) 149-159
  This study investigates the seismic performance of traditional timber-framed (hımış) structures incorporating different types of infill materials through advanced nonlinear finite element modeling. Timber-infilled walls represent a widely used hybrid construct...