Related Articles

• Effects of pre-cracked reinforced concrete in compression zone on prefabricated RC beam behavior
  Mahmut Cem Yılmaz
  Challenge Journal of Structural Mechanics (2023) 9(2) 77-83
  Cracks can occur in the compression zone of a beam cross section, in the middle part of the span due to different reasons. For instance, due to accidents happened during transportation of the prefabricated Reinforced Concrete (RC) beams on manufacturing site. ...
• Methods for multi-segment continuous cable analysis
  Abdullah Demir, Uğur Polat
  Challenge Journal of Structural Mechanics (2023) 9(2) 48-54
  Cables are invaluable members for some applications of engineering. The specialty is due to its behavior under transverse loads. Having almost no rigidity in transverse direction makes cables different from other structural elements. In most applications, cabl...
• Effect of dimensions of specimens on the impact performance of concrete
  Mohammed Gamal Al-Hagri, Shahed Husni Ben Issa Ebribesh, Fares Alamoudi, Abdulrahman Rakan Al Haj Ali
  Challenge Journal of Concrete Research Letters (2025) 16(2) 85-94
  Mechanical properties of concrete are size dependent. While many reports have discussed the size effect of the test specimen on the static properties of concrete, research on the effect of cross-sectional dimensions of the concrete beams on its impact performa...
• Experimental study on the mechanical performance of polypropylene fiber-reinforced concrete incorporating palm oil fuel ash as partial cement replacement
  Alaa Omar Tanash, Ahmed Mokhtar Albshir Budiea, Mohd Faizal Md Jaafar, Khairunisa Muthusamy, Fahrizal Zulkarnain
  Challenge Journal of Concrete Research Letters (2025) 16(3) 115-124
  Environmental pollution caused by the disposal of palm oil fuel ash, a type of waste from the palm oil trade, needs to be resolved. At the same time, activities involved in the manufacturing of cement, which is the primary binder in commonly used concrete, hav...
• Photocatalytic activation of fibrous lightweight polymer concrete surfaces under artificial light source
  Serdal Ünal, Mehmet Canbaz
  Challenge Journal of Concrete Research Letters (2025) 16(1) 15-24
  In general, surface contamination of building materials is caused by pollution, which can be divided into human-made and natural sources. Building materials whose surfaces are exposed to pollutants from these sources for a long time show chemical and physical ...