Cover & Contents Vol.9 No.1

Full Text:

Related Articles

• A discussion on the beam on elastic foundation theory
  Tunay Uzbay Yelce, Erdem Balcı, Niyazi Özgür Bezgin
  Challenge Journal of Structural Mechanics (2023) 9(1) 34-47
  A railway track is a structural composure of many elements. Railway track analyses requires analyses for the interaction between these elements and the interaction between the track and the vehicle passing over the track. Various design models have been develo...
• Natural frequencies of porous orthotropic two-layered plates within the shear deformation theory
  Ferruh Turan
  Challenge Journal of Structural Mechanics (2023) 9(1) 1-11
  This paper analyzes the natural frequencies of porous orthotropic laminated composite plates with two different porosity models based on the higher-order shear deformation theory. The fundamental relations of natural frequency analysis are derived by using the...
• Nonlinear in-plane response of 3D-printed concrete walls with varied infill patterns: Experimental mix design and numerical structural assessment
  İsmail Hakkı Tarhan, Yeşim Tarhan
  Challenge Journal of Structural Mechanics (2025) 11(3) 160-173
  This study investigates the nonlinear in-plane structural behavior of 3D-printed concrete wall elements with two representative internal infill patterns ‒ lattice (L) and triangular (T) ‒ using finite element modeling informed by experimentally derived materia...
• Improving bond performance of 3D-printable earth-based mortar reinforced with jute fibers
  Yeşim Tarhan, İsmail Hakkı Tarhan, Arnaud Perrot
  Challenge Journal of Structural Mechanics (2025) 11(2) 99-105
  3D printing technology has transformed the construction industry by enabling rapid and cost-effective production of complex geometries. However, it faces significant challenges, including sustainability concerns due to cement's environmental impact and reinfor...
• Experimental study on the mechanical performance of polypropylene fiber-reinforced concrete incorporating palm oil fuel ash as partial cement replacement
  Alaa Omar Tanash, Ahmed Mokhtar Albshir Budiea, Mohd Faizal Md Jaafar, Khairunisa Muthusamy, Fahrizal Zulkarnain
  Challenge Journal of Concrete Research Letters (2025) 16(3) 115-124
  Environmental pollution caused by the disposal of palm oil fuel ash, a type of waste from the palm oil trade, needs to be resolved. At the same time, activities involved in the manufacturing of cement, which is the primary binder in commonly used concrete, hav...