Cover & Contents Vol.9 No.4

Full Text:

Related Articles

• On the evaluation of lateral-torsional buckling of web-tapered cantilevers with doubly symmetric I-section
  Tolga Yılmaz, Mustafa Sertçelik, Hasan Selim Şengel
  Challenge Journal of Structural Mechanics (2023) 9(4) 153-162
  Recently, structural engineers have tended to design stronger and lighter structures due to economic reasons, technical developments in computer-aided design, and improvements in manufacturing. The demand for designing stronger and lighter structures has led t...
• Fuzzy logic based prediction of retaining wall stability
  Esra Aslı Çubukçu, Esra Uray, Vahdettin Demir
  Challenge Journal of Structural Mechanics (2023) 9(4) 145-152
  In geotechnical engineering, retaining walls are widely employed to solve the problem of supporting horizontal loads occurring between two different soil levels. In the traditional retaining wall design, stability checks continue until a safe design is obtaine...
• Nonlinear in-plane response of 3D-printed concrete walls with varied infill patterns: Experimental mix design and numerical structural assessment
  İsmail Hakkı Tarhan, Yeşim Tarhan
  Challenge Journal of Structural Mechanics (2025) 11(3) 160-173
  This study investigates the nonlinear in-plane structural behavior of 3D-printed concrete wall elements with two representative internal infill patterns ‒ lattice (L) and triangular (T) ‒ using finite element modeling informed by experimentally derived materia...
• Improving bond performance of 3D-printable earth-based mortar reinforced with jute fibers
  Yeşim Tarhan, İsmail Hakkı Tarhan, Arnaud Perrot
  Challenge Journal of Structural Mechanics (2025) 11(2) 99-105
  3D printing technology has transformed the construction industry by enabling rapid and cost-effective production of complex geometries. However, it faces significant challenges, including sustainability concerns due to cement's environmental impact and reinfor...
• Experimental study on the mechanical performance of polypropylene fiber-reinforced concrete incorporating palm oil fuel ash as partial cement replacement
  Alaa Omar Tanash, Ahmed Mokhtar Albshir Budiea, Mohd Faizal Md Jaafar, Khairunisa Muthusamy, Fahrizal Zulkarnain
  Challenge Journal of Concrete Research Letters (2025) 16(3) 115-124
  Environmental pollution caused by the disposal of palm oil fuel ash, a type of waste from the palm oil trade, needs to be resolved. At the same time, activities involved in the manufacturing of cement, which is the primary binder in commonly used concrete, hav...