Chakraborty | Optimal strain gage location for determination of mode I stress intensity factor for orthotropic laminates using a single strain gage

Online Submission

User

Article Tools

Abstract

Print this article

Indexing metadata

How to cite item

Finding References

Email this article (Login required)

Email the author (Login required)

Research Articles | Challenge Journal of Structural Mechanics

Download this PDF file

The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader).

If you would like more information about how to print, save, and work with PDFs, Highwire Press provides a helpful Frequently Asked Questions about PDFs.

Alternatively, you can download the PDF file directly to your computer, from where it can be opened using a PDF reader. To download the PDF, click the Download link above.

Fullscreen Fullscreen Off

Prediction of optimum design of welded beam design via machine learning

Yaren Aydın, Farnaz Ahadian, Gebrail Bekdaş, Sinan Melih Nigdeli

Challenge Journal of Structural Mechanics (2024) 10(3) 86-94

Design optimization is an important engineering design topic. One of the important issues in structural design is to minimize the cost. This study based on an engineering problem of Welded Beam Design aims to minimize the cost of the beam with machine learning...
Ultimate drift ratio prediction of steel plate shear wall systems: a machine learning approach

Muhammed Gürbüz, İlker Kazaz

Challenge Journal of Structural Mechanics (2024) 10(2) 34-46

Predicting the ultimate drift ratio of steel plate shear wall (SPSW) systems is important for ensuring the structural integrity and performance of these systems under lateral loads. In this study, machine learning models are developed for predicting the ultima...
Nonlinear in-plane response of 3D-printed concrete walls with varied infill patterns: Experimental mix design and numerical structural assessment

İsmail Hakkı Tarhan, Yeşim Tarhan

Challenge Journal of Structural Mechanics (2025) 11(3) 160-173

This study investigates the nonlinear in-plane structural behavior of 3D-printed concrete wall elements with two representative internal infill patterns ‒ lattice (L) and triangular (T) ‒ using finite element modeling informed by experimentally derived materia...
From ruins to reconstruction: Harnessing text-to-image AI for restoring historical architectures

Kawsar Arzomand, Michael Rustell, Tatiana Kalganova

Challenge Journal of Structural Mechanics (2024) 10(2) 69-85

The preservation of cultural heritage has become increasingly important in the face of conflicts and natural disasters that threaten historical sites worldwide. This study explores the application of artificial intelligence (AI), specifically text-to-image gen...
A different approach for green concrete production: Determination of the effect of e-waste and waste rubber powder on durability properties of concrete

H. Alperen Bulut

Challenge Journal of Concrete Research Letters (2024) 15(3) 69-81

This study was carried out to present a different approach to green concrete production by utilizing electronic waste (e-waste) and waste rubber powders in order to provide a solution to both the cost and carbon footprint problems arising from the rapid consum...