Related Articles

• Improving bond performance of 3D-printable earth-based mortar reinforced with jute fibers
  Yeşim Tarhan, İsmail Hakkı Tarhan, Arnaud Perrot
  Challenge Journal of Structural Mechanics (2025) 11(2) 99-105
  3D printing technology has transformed the construction industry by enabling rapid and cost-effective production of complex geometries. However, it faces significant challenges, including sustainability concerns due to cement's environmental impact and reinfor...
• Influence of connector forces on the expansion configuration of a hexagonal modular floating structure
  Nur Hanani Ahmad Azlan, Nik Mohd Ridzuan Shaharuddin, Arifah Ali
  Challenge Journal of Structural Mechanics (2025) 11(2) 89-98
  The preliminary design of a hexagonal modular floating structure (HMFS) system includes two configurations: U-shaped and V-shaped, which link seven hexagonal modules that create a network of connectors. The connector force is a crucial consideration in the lay...
• Mechanical characterization of FDM-printed PLA: Role of infill geometry and build direction
  Tevfik Oğuzhan Ergüder, Caner Bulut
  Challenge Journal of Structural Mechanics (2025) 11(4) 201-214
  This study examines the mechanical behavior of polylactic acid (PLA) components produced via Fused Deposition Modeling (FDM), focusing on the effects of infill geometry and build orientation on tensile strength and deformation. Three infill patterns‒Cubic Subd...
• Nonlinear in-plane response of 3D-printed concrete walls with varied infill patterns: Experimental mix design and numerical structural assessment
  İsmail Hakkı Tarhan, Yeşim Tarhan
  Challenge Journal of Structural Mechanics (2025) 11(3) 160-173
  This study investigates the nonlinear in-plane structural behavior of 3D-printed concrete wall elements with two representative internal infill patterns ‒ lattice (L) and triangular (T) ‒ using finite element modeling informed by experimentally derived materia...
• Examining the effects of different seismic base isolators on the seismic behavior of a real-size steel truss structure
  Serdar Çarbaş, Refik Burak Taymuş, Mehmet Özdemir
  Challenge Journal of Structural Mechanics (2025) 11(2) 106-115
  In this study, the seismic behavior of a real-size steel truss structure is examined for elastomeric isolator, double friction pendulum isolator, and fixed support conditions. Hence, the main aim of the study is to examine which type of support is safer for se...