Related Articles

• Prediction of optimum design of welded beam design via machine learning
  Yaren Aydın, Farnaz Ahadian, Gebrail Bekdaş, Sinan Melih Nigdeli
  Challenge Journal of Structural Mechanics (2024) 10(3) 86-94
  Design optimization is an important engineering design topic. One of the important issues in structural design is to minimize the cost. This study based on an engineering problem of Welded Beam Design aims to minimize the cost of the beam with machine learning...
• Freeze-thaw and drop-weight impact resistance of fiber-reinforced pervious concretes produced using recycled pervious concrete aggregate
  Demet Yavuz
  Challenge Journal of Structural Mechanics (2024) 10(4) 138-148
  Pervious concrete can rapidly drain stormwater from the top layer to the sublayer. However, the porous structure of this concrete also results in low mechanical properties, which prevent the widespread use of pervious concrete around the world. This study inve...
• Nonlinear in-plane response of 3D-printed concrete walls with varied infill patterns: Experimental mix design and numerical structural assessment
  İsmail Hakkı Tarhan, Yeşim Tarhan
  Challenge Journal of Structural Mechanics (2025) 11(3) 160-173
  This study investigates the nonlinear in-plane structural behavior of 3D-printed concrete wall elements with two representative internal infill patterns ‒ lattice (L) and triangular (T) ‒ using finite element modeling informed by experimentally derived materia...
• Investigating the effects of glass fiber in enhancing concrete pavement performance
  Fatih İrfan Baş
  Challenge Journal of Structural Mechanics (2025) 11(1) 42-54
  Flexible pavements are considered more sustainable than concrete pavements primarily due to the higher long-term maintenance and rehabilitation costs associated with concrete pavements. Concrete pavements possess a higher modulus of elasticity, which allows th...
• Photocatalytic activation of fibrous lightweight polymer concrete surfaces under artificial light source
  Serdal Ünal, Mehmet Canbaz
  Challenge Journal of Concrete Research Letters (2025) 16(1) 15-24
  In general, surface contamination of building materials is caused by pollution, which can be divided into human-made and natural sources. Building materials whose surfaces are exposed to pollutants from these sources for a long time show chemical and physical ...