Related Articles

• Design of cylindrical steel liquid tanks with stepped walls using One-foot method
  Özer Zeybek
  Challenge Journal of Structural Mechanics (2021) 7(4) 162-169
  Cylindrical steel tanks are used in most countries to store bulk volumes of both solid and liquid products such as water, oil, gasoline and grain. Such steel tanks are prone to buckling when subjected to external pressure either due to vacuum or due to wind. T...
• Experimental examination of strength and behavior of masonry brick walls strengthened with expanded steel plates
  Ezatullah Ahmadzai, Zeynep Yaman, Alper Cumhur
  Challenge Journal of Structural Mechanics (2022) 8(3) 110-121
  As primary load-bearing members of masonry buildings, the strength and behavior of masonry brick walls are the most important factors affecting the structural performance for the loads the building is exposed to during its life span. The current paper therefor...
• Numerical evaluation of reinforced concrete slabs with fixed support under impact load
  Tolga Yılmaz, Hasan Selim Şengel
  Challenge Journal of Structural Mechanics (2022) 8(3) 122-132
  Reinforced concrete (RC) structural members may be subjected to impact load besides quasi-static load or other dynamic loads like earthquake and wind loads in their service periods. Many research emphasized that although impact load acts on structural members ...
• Concrete strength monitoring and damage detection using piezoelectric-based wireless sensor
  Raju Narwade, Ruhita Jadhav
  Challenge Journal of Concrete Research Letters (2025) 16(1) 40-50
  Concrete stands as the predominant and extensively employed structural material in civil engineering. Timely evaluation of concrete strength is essential for maintaining structural safety and minimizing construction delays, thereby avoiding possible structural...
• Photocatalytic activation of fibrous lightweight polymer concrete surfaces under artificial light source
  Serdal Ünal, Mehmet Canbaz
  Challenge Journal of Concrete Research Letters (2025) 16(1) 15-24
  In general, surface contamination of building materials is caused by pollution, which can be divided into human-made and natural sources. Building materials whose surfaces are exposed to pollutants from these sources for a long time show chemical and physical ...