Email this article The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader).
If you would like more information about how to print, save, and work with PDFs, Highwire Press provides a helpful Frequently Asked Questions about PDFs.
Alternatively, you can download the PDF file directly to your computer, from where it can be opened using a PDF reader. To download the PDF, click the Download link above.
Related Articles
-
Osman Tunca, Serdar ÇarbaşChallenge Journal of Concrete Research Letters (2022) 13(2) 72-79In this study, optimal weight design of a reinforced concrete beam subjected to various loading conditions is investigated. The purpose of the optimization is to attain the minimum weight design of the reinforced concrete beam under distributed and two-point l...
-
Tolga Yılmaz, Hasan Selim ŞengelChallenge Journal of Structural Mechanics (2022) 8(3) 122-132Reinforced concrete (RC) structural members may be subjected to impact load besides quasi-static load or other dynamic loads like earthquake and wind loads in their service periods. Many research emphasized that although impact load acts on structural members ...
-
Hasan Selim Şengel, Kutluhan Ethem Kınık, Hakan Erol, Mehmet CanbazChallenge Journal of Structural Mechanics (2022) 8(4) 150-158In this experimental study the effect of waste steel tire wire was investigated on the concrete bollards of mechanical behavior under impact loading. Concrete bollards were produced using three different dimensions with three different volumes of waste steel t...
-
Nurver Karslı, Bahanur Hilal KisbetChallenge Journal of Structural Mechanics (2024) 10(2) 58-68Objective of this study is to evaluate the effect of different trimline extension of aligners and the effect of elastics applied through the slit cutouts and buttons on the mandibular dentition using Class II intermaxillary elastics combined with clear aligner...
-
Özer Zeybek, Yasin Onuralp ÖzkılıçChallenge Journal of Structural Mechanics (2022) 8(3) 99-109The common way to amplify strength and stiffness of the tank wall is to use the stiffening rings. These stiffening rings can be classified as the primary and secondary stiffening rings (PSRs and SSRs). PSR is placed around the top of the tank shell and it assi...
