Related Articles

• Development of a sustainable geopolymer structural element with waste glass powder: Mechanical characteristics
  Serdal Ünal, Mehmet Canbaz
  Challenge Journal of Structural Mechanics (2026) 12(1) 22-29
  In this study, the potential of converting waste glass powder, sourced from glass manufacturing processes in Turkey, into sustainable and environmentally friendly construction materials was explored. A novel approach was adopted by producing geopolymeric build...
• Photocatalytic activation of fibrous lightweight polymer concrete surfaces under artificial light source
  Serdal Ünal, Mehmet Canbaz
  Challenge Journal of Concrete Research Letters (2025) 16(1) 15-24
  In general, surface contamination of building materials is caused by pollution, which can be divided into human-made and natural sources. Building materials whose surfaces are exposed to pollutants from these sources for a long time show chemical and physical ...
• Improving bond performance of 3D-printable earth-based mortar reinforced with jute fibers
  Yeşim Tarhan, İsmail Hakkı Tarhan, Arnaud Perrot
  Challenge Journal of Structural Mechanics (2025) 11(2) 99-105
  3D printing technology has transformed the construction industry by enabling rapid and cost-effective production of complex geometries. However, it faces significant challenges, including sustainability concerns due to cement's environmental impact and reinfor...
• Impact of composite columns on soft and weak storey irregularities in buildings without ground floor infill walls
  Yusuf Yıldız, Fethi Şermet
  Challenge Journal of Structural Mechanics (2025) 11(2) 70-81
  In buildings without infill walls on the ground floor, structural irregularities, such as soft and weak storey irregularities can significantly reduce their resilience to earthquakes. These irregularities arise from insufficient lateral stiffness and strength ...
• A different approach for green concrete production: Determination of the effect of e-waste and waste rubber powder on durability properties of concrete
  H. Alperen Bulut
  Challenge Journal of Concrete Research Letters (2024) 15(3) 69-81
  This study was carried out to present a different approach to green concrete production by utilizing electronic waste (e-waste) and waste rubber powders in order to provide a solution to both the cost and carbon footprint problems arising from the rapid consum...